For owners of the Kenmore Progressive model Upight 35,922 or 35,923, maybe they were all the great advantages of vacuum sold, but said very little to do to run the vacuum in top form
We are using this gap by chance on a very dirty job of cleaning, and died for us, because no one properly maintained.
Fortunately, this void requires only a few things to keep him alive. Here are 4 tips you need to know to waitYour empty.
Tip # 1: pockets. The biggest problem of this gap is to make sure to change your bag if it starts in full. In this vacuum, that is, if the bag is about 3 / 4 full, it's time to change the bag. If you replace the bag with a new one, you (2) decisions. Regular 2-ply filter bag and a HEPA cloth bag.
The difference between the two bags is that the bag is best HEPA filter very small particles and then vacuum to breathe easier as it is doneCotton. The paper bag does a good job of filtering dust and dirt, trapping most of the particles. However, some particles escape from the bag and you can dirty your emptiness.
If you open the front of the vacuum and to see a lot of dust on the internal compartment, you should check both the pocket or in a crack in his pocket. Sometimes you have a tear in the bag when the bag is connected to the tube to collect dust.
Tip # 2: filters. The Kenmore Progressive has (2) of the filter.One is on the back which is an exhaust filter and looks like a square pleated filter, the other is a pre-filter for the vacuum motor.
The exhaust filters the air that is pulled into the vacuum. You see, a vacuum motor pulls air in, expanding the bag, while the exhaust air is vented out to create suction. The exhaust filter (EF-1) is just like an air filter on your car. it traps the partilces going out. It is a HEPA filter, and you can easily see if you need to change this filter by looking to see how dirty it looks. You should check this filter at least once per month.
The other filter on this vacuum is the pre-filter. This is an important filter that gets overlooked, it filters the air to reduce the chance of particles going into the vacuum motor. This filter is in the bag compartment below the bag. It is a 2 ply filter that should be checked once per month as well. If this filter is not kept clean, it restricts the suction power of the vacuum motor, reducing your cleaning power. If you get a rip in the bag, this filter will clog quickly. If it is not cleaned, dirt particles can get into the motor and kill your Kenmore!
Tip #3: Brush roll care. Check the brush roll on the bottom of the vacuum for any string, hair or carpet fiber that can wrap around the brush roll and restrict the motor inside, causing it to burn out or trip the reset button. Since this vacuum does not have belts that you can replace, this is an important maintenance tip. You can remove this stuff by taking a knife or scissors and cutting the obstructions and pulling them out.
Tip #4: Cleaning. Keep the inside of the bag compartment clean, by wiping it with a cloth and mild cleaning product. Also, clean the inside area of the exhaust filter of fine dust. You can also clean the outside of the vacuum clean in the same way. A tip to reduce static cling of dust is to apply a protector such as Armor All or Son of a Gun. Not only will your Kenmore stay clean longer, but you will have the most shiny vacuum in your neighborhood.
By following these tips, your Kenmore 35922 or 35923 will stay in top shape, running great for many years to come.
No comments:
Post a Comment